ULTRAPAR UP1000 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electrical shock, disconnect the spotlight from the mains before cleaning or servicing the unit. No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electrical shock, do not expose the spotlight to rain or moisture. DETAILED SAFETY INSTRUCTIONS: All safety and operating instructions should be read before the spotlight is operated.
If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted.
Page 4
ULTRAPAR UP1000 Disassembling the lamp casing / installing an HPL lamp Lamps that have been deformed or damaged through heat, must be replaced immediately! Please proceed as follows to replace the HPL lamp: s Disconnect the spotlight from the mains power supply, and unscrew the thumb screw on the rear of the lamp casing (G 9.5 socket).
ULTRAPAR UP1000 Dismounting the lens The lens gets very hot during operation of the spotlight, so let it cool down sufficiently before you attempt to dismount it! s Disconnect the spotlight from the mains and wait until it has cooled down. s Place the spotlight on a flat and stable surface.
3.2 kg BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without further notice. Specifications and appearance may differ from those listed or shown.