Troubleshooting - Jenn-Air 8113P753-60 Use & Care Manual

Dual-fuel modular downdraft slide-in range
Table of Contents

Advertisement

Available languages

Available languages

T
ROUBLESHOOTING
PROBLEM
For most concerns, try these first.
Part or all of appliance does
not work.
Clock, indicator words, and/or
lights operate but oven does
not heat.
Surface burner fails to light.
The flame is uneven.
Surface burner flame lifts
off ports.
Food is not broiling properly or
smokes excessively.
Baking results are not as
expected or differ from
previous oven.
SOLUTION
• Check if oven controls have been properly set.
• Check to be sure plug is securely inserted into receptacle.
• Check or re-set circuit breaker. Check or replace fuse.
• Check power supply.
• Check if surface and/or oven controls have been properly set. See pgs. 12 & 19.
• Check if oven door is unlocked after self-clean cycle. See pg. 6.
• Check if oven is set for a delayed cook or clean program. See pgs. 19 & 6.
• Check if Control Lock is activated. See pg. 18.
• Check if control is in Sabbath Mode. See pg. 31.
• Oven may be set for a Cook & Hold or delay function.
• Control Lock may have been set. See pg. 18.
• Check to be sure unit is properly connected to power supply.
• Check for a blown circuit fuse or a tripped main circuit breaker.
• Check to be sure ignitor is dry and clicking. Burner will not light if ignitor is damaged,
soiled or wet. If ignitor doesn't click, turn control knob OFF.
• Burner ports may be clogged.
• Check to be sure a pan is sitting on the grate above.
• Check oven rack positions. Food may be too close to flame.
• Aluminum foil was incorrectly used. Never line the broiler insert with foil.
• Trim excess fat from meat before broiling.
• A soiled broiler pan was used.
• Preheat oven for 2-3 minutes before placing food in the oven.
• Broil with the oven door closed.
• Check the oven temperature selected. Make sure oven is preheated when recipe
or directions recommend preheat.
• Make sure the oven vent has not been blocked. See page 23 for location.
• Check to make sure range is level.
• Temperatures often vary between a new oven and an old one. As ovens age, the oven
temperature often "drifts" and may become hotter or cooler. See page 31 for
instructions on adjusting the oven temperature. Important: It is not recommended
to adjust the temperature if only one or two recipes are in question.
• Use correct pan. Dark pans produce dark browning. Shiny pans produce light
browning.
• Check rack positions and pan placement. Stagger pans when using two racks. Allow
1-2 inches between pans and oven wall.
• Check the use of foil in the oven. Never use foil to cover an entire oven rack. Place
a small piece of foil on the rack below the pan to catch spillovers.
10
Cont.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Jds9860bdJds9860bdw

Table of Contents