LeMond g-force RT digital Owner's Manual page 28

A Few Additional Tips about the Functions of the Display Console:
• You can easily change the resistance level of a workout after the program is running. Using the + or –
keys, increase or decrease the resistance to suit your needs. Doing so changes the resistance through-
out all segments of the program.
• The duration of a workout can be changed before a program begins running but not during the
program. To change the duration once a program is running, you will need to exit the program and
restart it after entering in the desired duration.
• During a workout, the MESSAGE DISPLAY will scroll through the statistics of your current workout.
• At the completion of a workout, the MESSAGE DISPLAY will summarize statistical information from
the workout you have just completed such as total distance, and total time. These statistics are also
displayed if the workout has been ended prematurely.
• Pressing STOP during a program will pause the program. To restart the workout, simply press ENTER
and the workout will resume at the segment that it was paused. If no action is taken within 15
seconds of a program being paused, the display console will switch to a resting mode. After two
minutes the display console will turn itself off .
• If you stop pedaling during a workout, the display console will behave in the same manner as if you
had pressed the STOP key.
• You can change the units that distance is measured in from miles to kilometers (km), by pressing the
ENTER, BACK and MANUAL keys simultaneously. Use the + or – keys to toggle between UNITS USA
(miles) and UNITS METRIC (km).
g•force RT digital
The
fi tness goals. Durable and high performance components were a key design feature of the g•force RT
digital. The safety level achieved by the design, however, can only be maintained when the equipment
is regularly examined for damage and wear. Inoperable or worn components should be replaced im-
mediately and the equipment should be put out of use until it is repaired. Read all maintenance instruc-
tions thoroughly before beginning work. Maintenance is the sole responsibility of the owner.
Initial Service
Choosing a cool and dry location for the
and increase your enjoyment while using the bike. After assembling the equipment, use a soft cotton
cloth to remove any dust or residue that may have accumulated during shipping. Regular maintenance
will keep your bike in good working order. No calibration is required by the user.
28
was designed to be an attractive, eff ective and safe method for realizing your
g•force RT digital
will extend the lifetime of the equipment