Grounding Instructions - Jenn-Air M418 Use And Care Manual

Grounding Instructions
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire
for the electric current. This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug must be plugged into an
outletthat is properlyinstalledand grounded.
WAR N IN
G
- Improper use of the grounding plug can result in
a risk of electric shock.
Consult a qualified electrician or serviceman if the grounding instructions
are not completely understood,or if doubt exists as to whether the appliance
is properlygrounded.
Useof an extensioncord isnot recommended,but if it is absolutelynecessary
to use an extension cord, use only a 3-wire extension cord that has a 3-
blade grounding plug, and a 3-slot receptacle that will accept the plug on
the appliance. The marked rating of the extension cord shall be equal to
or greater than the electrical rating of the appliance.
Where an electrical wall receptacle is encountered which will accept only
a two-prong plug, it is the personalresponsibilityand obligationof the owner
to contact a qualified electrician and have the outlet replacedwith a properly
grounded and polarized receptaclefor a three-prong, grounding plug. Such
receptacle must also meet local electrical codes, if applicable, and/or the
National Electrical Code.
Do not under any circumstance cut or remove the third (ground) prong
from the power cord.
Do not usean adapter plugwith this appliance.
IMPORTANT
The above grounding instructions must be followed not only for your
personal protection against shock and fire hazards, but also to insure
satisfactory operation of the electronic controls. In addition to proper
grounding, a polarity check of outlet should be made to insure that
polarity is not reversed. Improper grounding or reversed polarity can
damage the _lectronic control or cause it to operate erratically.