Time/Date Setup; Setting Daylight Savings Time; Setting Current Time And Date - Honeywell Tuxedo Touch Series Installation And Setup Manual

Time/Date Setup

You can set the time and date from the Set Time & Date screen.
When the time is set it is stored in the keypad and sent to the control panel when you press Apply and
answer Yes to the following prompt. Additionally, when using the keypad with a residential panel, the
panel downloads its time into the keypad once an hour after the clock is set.
If the Get Time icon is pressed, the keypad downloads the time and date from the control panel and
exits the Set Time & Date screen. Note: This icon
appear with all commercial panels.

Setting Daylight Savings Time

To set the daylight savings time, from the "Home" screen do the following:
ICON
1. Press Setup and the System
Setup icon.
2. Press the Time/Date Setup icon
and enter your Authorized Code.
3. Press the DST icon if you want
daylight savings time to affect your
system clock.
4. Set the "Start DST" time and then
the "End DST" time by pressing the
Month, Weekend and Hour that you
want DST to start.
5. APPLY saves the settings.

Setting Current Time and Date

To set the current time, do the following:
ICON
1. Press the Time/Date Setup icon;
enter your Authorized Code.
2. Press the Month "arrow", and
select the current month.
3. Press the Year that is being
displayed and enter the current year.
4. Press the Hour that is being
displayed and enter the current
hour.
5. Press the Minutes that is being
displayed and enter the current
minute.
6. Select AM or PM. (Each
depression switched the AM/PM
display).
User System Setup (cont'd)
ACTION
ACTION
23
appears with residential panels and may not
NOTES
If DST On (Daylight Savings Time) is selected, the
keypad adjusts for Daylight Savings time at the month,
week and time chosen.
Make sure "DST" On is checked to enable this feature.
NOTES
After each selection the window closes automatically
and the selection is displayed.
Select if you want a 12-hour or 24-hour format for your
time display by pressing the circle to the left of the 12
Hour display.