Miele PW 6065 Operating And Installation Instructions page 63

Auto load control
The washer-extractor has auto load
control. The water level and the
programme durations are adjusted
according to the load. If the auto load
control is deactivated, the machine
will always carry out the programme
sequence based on a full load.
The machine is delivered with this
option activated.
Pre-wash water
You can choose for the pre-wash to
be carried out with either hot or cold
water (not available with the Curtains
programme). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The machine is delivered with the Hot
water option selected.
Settings/Supervisor level menu
Main wash water
You can choose for the main wash to
be carried out with either hot or cold
water (not available with the
Woollens , Silks and Curtains
programmes). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The machine is delivered with the Hot
water option selected.
If the machine is not connected to
the hot water supply, the programme
durations will be longer and will vary
from the time remaining shown in the
display.
The machine will need to be set up
specifically for Recycled water if this
option is selected.
Rinse water
You can choose for the rinses in the
Cottons , Minimum iron Table linen ,
Kitchen linen , Towelling and Sluice
programmes to be carried out with
either hot or cold water. Hot water
can only be only taken in if the wash
temperature is above 50°C.
The machine is delivered with the Hot
water option selected.
The machine will need to be set up
specifically for Recycled water if this
option is selected.
63