Vermont Castings RFSDV24 Installation Instructions And Homeowner's Manual page 18

RFSDV24/34 Freestanding Direct Vent Gas Fireplace
For Model RFSDV34 (Refer to Fig. 28)
1. Remove window frame assembly.
(Refer to Window Frame Assembly
Removal section)
2. Remove logs from packaging.
As with all plastic items - these
logs and their packaging are
not toys and should be kept
away from children and infants.
3. Place rear log (KR10) n rear bracket
(ensure log is seated properly, leveled
and centered to the unit) so it will not
move from side to side and it is firmly
positioned on the bracket.
4. Slip front ember log (KR7) down behind
the front deflector.
5. Place front left log (KR8*) on top of
burner, left side. Using the bottom holes
in the log, locate it into the left bracket
log locator studs.
6. Place front right log (KR9) on top
of burner, right side. Use log's
bottom holes to locate it into the
right bracket log locator studs.
7. Place burner lava rock on top
of burner between the em-
ber log and the two front
logs.
8. Place top left log (KR11)
onto locator notches.
Ensure the log is secure.
9. Place top right log
(KR12) onto locator
notches. Ensure the log
is secure.
18
Figure 27
RFSDV24
Log Front Left
(KR13)
Log Top Left
(KR11)
Figure 28
RFSDV34
Log Front Left
(KR8)
Log Ember
Bed (KR7)
LG344
Log Rear Left (KR15)
Burner Lava Rock
Log Top Right (KR12)
LG345
24RFSDV LOGS
6/04
Log Front Right (KR9)
LG344
RFSDV
LOGS
6/04
Log Rear Right (KR16)
LG345
Log Front
Right (KR14)
Log Rear (KR10)
10003550