Sennheiser RS 170 Quick Manual page 42

Hide thumbs Also See for RS 170:
Table of Contents

Advertisement

If a problem occurs ...
30
Problem
Possible cause
Sound is
Signal of the sound source
distorted
is distorted
Signal of the sound source
is too strong
Other problems
Problem
Possible cause
The
No mains connection
transmitter
cannot be
switched on
Headphone
Rechargeable batteries are
s cannot be
flat
switched on
Rechargeable batteries are
inserted the wrong way
round.
Headphone
Headphones do not make
s cannot be
contact to the charging
recharged
contacts
Operating
Rechargeable batteries are
time
exhausted
decreases
If a problem occurs that is not listed in the above table or if the problem
cannot be solved with the proposed solutions, please contact your local
Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at
www.sennheiser.com.
Possible solutions
Page
Reduce the volume
of the sound source
Reduce the volume
21
by pressing the
VOLUME –
button
on the headphones
Set the
ATTENUATOR
14
switch
to
"–8 dB"
Possible solution
Page
Check the connection
15
of the power supply
unit to the
transmitter and to
the mains
Recharge the
17
rechargeable
batteries
Remove the
16
rechargeable
batteries from the
headphones and
reinsert them again.
Observe correct
polarity
Ensure that the
17
headphones are
properly seated on
the charging
contacts
Clean the charging
28
contacts
Replace the
16
rechargeable
batteries

Advertisement

Table of Contents
loading

Table of Contents