Sennheiser RS 170 Quick Manual page 26

Putting the RS 170 into operation
P t
V d
E t
S ti
S f l S
14
Connecting the transmitter to RCA sockets (output)
B
WARNING Danger of hearing damage due to high volumes!
You can suffer hearing damage if you are using other Kleer
compatible headphones without integrated volume control,
such as the Sennheiser MX W1, with the TR 170 transmitter:
In this case, do not connect the transmitter to the RCA
sockets (output) of your sound source, but to the
headphone socket of your sound source.
Before putting the headphones on, set the volume on the
sound source to a low level.
Depending on your sound source, you have to change the setting of the
ATTENUATOR switch
source.
Portable sound source
(MP3 player, mobile telephone)
Set the ATTENUATOR
to "0 dB".
Plug the adapter for RCA sockets
Connect the red connector of the adapter
sound source.
Connect the white connector of the adapter
socket L of your sound source.
B
If your sound source has several RCA sockets, use the RCA outputs
(usually "Audio Out").
in order to optimally adjust the signal of the sound
Stationary sound source
(hi-fi system, amplifier)
switch Set the ATTENUATOR
to "–8 dB".
onto the audio cable
to the red socket
0
switch
.
R of your
to the white or black
7