Panasonic KX-HGT100CE Quick Reference Manual page 3

A LCD (Liquid Crystal
Display)
B Headset Jack
C PROGRAM/EXIT: Used to
enter and exit the personal
programming mode.
D CLEAR: Used to erase some
or all call logs, or clear digits
or characters.
E AUTO: Used for Speed
Dialling.
F HOLD
*1
: Used to place a call
on hold.
G REDIAL: Used to redial the
last 10 dialled numbers.
H MUTE: Used to mute the
microphone/handset/headset
during a conversation.
I MIC (Microphone): Used for
hands-free conversations.
*1
These 3 indicators simultaneously flash red when you cannot make or
receive calls due to an error.
*2
Availability of this feature depends on your PBX. Consult your dealer.
*3
Press up or down while the unit is idle to access the outgoing, incoming,
and missing call logs.
Location of Controls
J SP-PHONE (Speakerphone)/
HEADSET
performing hands-free
operations. Also used to
make or answer calls if a
headset is connected.
K MESSAGE
the Voice Mail feature
call back the party who left the
message waiting indication.
The indicator turns red in both
cases.
L TRANSFER: Used to
transfer a call to another
party.
M Navigator Key
adjust the volume and
display contrast, select
desired items, or view call
logs.
N INFORMATION: Used to
display your extension
number, the status of the unit,
and the network settings on
the LCD display.
O OK: Used to select the items.
Also used as end of dialling.
*1 : Used for
*1 : Used to access
*2 or to
*3 : Used to
3