Inspection; Cigarette Lighter - Mitsubishi Electric 55624R(S)-MF Service Manual

CIGARETTE LIGHTER

REMOVAL AND INSTALLATION
Removal steps
1. Ashtray
2. Heater control knob
3. Heater panel
4. Plug
5. Fixing ring
6. Socket case
7. Plate
8. Socket
9. Protector
CIGARETTE LIGHTER - Cigarette Lighter

INSPECTION

l Take out the plug, and check for a worn edge on the
element spot connection, and for shreds of tobacco or
other material on the element.
l
Using an ohmmeter, check the continuity of the element.
CAUTIONS FOR USE OF THE CIGARETTE LIGHTER
SOCKET AS AUXILIARY POWER SOURCE
1. When using a "plug-in" tYpe of accessory, do not use
anything with a load of more than 120W.
2. It is recommended that only the lighter be inserted in
the receptacle.
Use of "plug-in" type accesories may damage the
receptacle and result in poor retention of the lighter.
NOTE
The specified load should be strictly observed, because
overloaded cord burns the ignition switch and harness.
TSB Revision
7
1