Table of Contents
Advertisement
Problem
- Unit does not run
- Battery will not charge
PRODUCT SPECIFICATIONS
Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V/1.5Ah, DC only
Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..........130 MPH
Tube Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..........20 in.
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............4 Ib.
Charger (adapter) input..................................................120V, 60Hz, AC
Battery Charging time.................................................................1 hour
- One Speed Switch - On/Off - Snap on tube - Rubber Molded Over Handle -
TROUBLESHOOTING
Possible Cause
- Battery not making contact
- Battery not installed properly
- Battery not charged
- Battery not inserted into charger
- Charger not plugged in
- Surrounding air temperature too hot or too cold
FEATURES
LB21018
- Check battery is fully inserted
- Check that battery is securely connected to the blower
- Check battery charging requirements
- Insert battery into charger until red LED appears
- Plug charger into a working outlet
- Check current at receptacle by plugging in a lamp or
other appliance
- Check to see if receptacle is connected to a light switch
which turns power off when you turn out the lights
- Move charger and tool to a surrounding air temperature of
above 40 degree F (4,5 degree C) or below 105 degree F
( +40,
5 degree C)
5
Possible Solution
Advertisement
Table of Contents
