Advertisement
PRODUCT SPECIFICATIONS
CB20018
Input.
...18 V, DC only
Speed
....140
MPH
Tube Length.
.. ............. 20
in.
Weight.
.,.4,811>.
- One Speed Switch - On/Off - Snap on tube Rubber Molded Over Handle
HANDLE
CB20018
SWITCH
BLOWER FRONT TUBE
\
BATTERY PACK
REAR BLOWER TUBE
Problem
• Unit does not run
• Battery will not charge
TROUBLESHOOTING
Possl!>l" Cause
• Battery not making contact
- Lock off not My operated
- Battery not installed properly
- Batterj not charged
- Battery not inserted mto charger
- Charger not plugged in
- Surrounding air temperature too hot or too cold
Possible Solution
- Check battery '5 fUlly inserted
• Check that lock off is fUlly depressed prtor to
moving trigger
- Check that battery is securely connected to the blower
- Check battery charging requirements
- Insert battery into charger until red LED appears
- Plug charger into a wcrkjng outlet
Check CUlTent at receptacle by plugging in a lamp or
other appliance
Check to sae if receptacle is oonnected to a
switch
which tums power off when you tum out the
- Move charger and tool to a surrounding air temperature of
above 40 degree F (4,5 degree C) or below 105 degree F
( +40,5 degree
C)
Advertisement
