Table of Contents
Advertisement
TG6411-6421E(e).book Page 16 Monday, November 17, 2008 5:17 PM
Making/Answering Calls
Making calls
1
Lift the handset and dial the phone
number.
L To correct a digit, press ^.
2
{C}
3
When you finish talking, press
{ih} or place the handset on the
base unit or charger.
Using the speakerphone
1
Dial the phone number and press
{s}.
L Speak alternately with the other
party.
2
When you finish talking, press
{ih}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1
j (right soft key)
2
{V}/{^}: Select the desired phone
number.
3
{C}
11
Answering calls
When a call is being received, the ringer
indicator on the handset flashes.
1
Lift the handset and press {C} or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
2
When you finish talking, press
{ih} or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 20.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the
desired volume while the handset is
ringing for an incoming call.
Note:
L You can also program the handset
ringer volume beforehand (page 20).
Advertisement
Table of Contents
