Lift Up Bunk; Rear Lift Down Bunk - Bailey 2002 Series Owner's Manual

Chapter 5
ASSEMBLING THE BUNKS (continued)

Lift up Bunk

i. Remove cushions and draw the curtains.
ii/iii. Holding bunk in both hands pull it inwards whilst lifting upwards.
iv. The bunk mechanism will automatically lock in the up position.
v. Release retaining straps on the underside of bunk base. The second
half of the bunk base can now be hinged open.
vi. Turn the turnbuckle catches located on the metal bunk legs to ensure
that the bunk cannot be folded by pushing up from below.
vii. The metal safety rails and ladder can now be slotted into position.

Rear Lift Down Bunk

i. Draw the rear curtains
ii. Undo the two turnbuckles that secure the bunk under the rear locker.
iii. Carefully pull out the bunk and lower it onto the 'bunk arms'.
iv. Unfold the bunk pulling the top upwards and towards the rear
v. Locate the bunk in the location pins and slide the shoot bolts to ensure
that the bunk cannot be unintentionally folded by pushing up from
below.
vi. The metal safety rails and ladder can now be slotted into position.
Warning: It is essential for safe use that the bunk location pins are
fully engaged before occupying the bunk.
130
GENERAL