Factory Default - Miele G5100 Operating Instructions Manual

Additional functions

Factory default

If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:
^ Switch the dishwasher off using the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the Start/Stop indicator light
comes on.
If this does not happen, start the
procedure from the beginning again.
^ Press the Delay start button twelve
times.
The Pots & pans 75 °C indicator light
will give one long flash and two brief
flashes at intervals.
42
The flashing sequence in the display
shows what the current setting is.
– "p 1": All settings are set to factory
default settings.
– "p 0": At least one setting has been
changed.
^ To reset the dishwasher to the factory
default settings, press the Start/Stop
button.
The setting is now stored in memory.
^ Switch the dishwasher off using the
On/Off button K.