MSI G52-MA00353 User Manual page 50

Chapter 3
Settings are Enabled (default) and Disabled.
CPU L2 Cache ECC Checking
This allows you to enable or disable the ECC (Error-Correcting Code) feature
for error detection and correction when data passes through L2 cache
memory. Settings are Enabled and Disabled. Default value is Enabled.
Processor Number Feature
This feature is for Pentium
check CPU Serial Number. Set to Disabled if you don't want the system to
know the CPU Serial Number. Default value is Enabled.
Quick Power On Self Test
Setting the item to Enabled allows the system to shorten boot time since it
will skip some check items. Settings are Enabled and Disabled. Default
value is Disabled.
First/Second/Third Boot Device
The items allow you to set the sequence of boot devices where BIOS
attempts to load the disk operating system. The settings are:
HDD-0
HDD-1
HDD-2
HDD-3
Floppy
ZIP100
LS-120
SCSI
LAN
CD-ROM
Disabled
Boot Other Device
Setting the option to Enabled allows the system to try to boot from other
device if the system fails to boot from the 1st/2nd/3rd boot device.
®
!!! only. When set to Enabled, the system will
The system will boot from the first HDD.
The system will boot from the second HDD.
The system will boot from the third HDD.
The system will boot from the fourth HDD.
The system will boot from floppy drive.
The system will boot from ATAPI ZIP drive.
The system will boot from LS-120 drive.
The system will boot from the SCSI.
The system will boot from the Network drive.
The system will boot from the CD-ROM.
Disable this sequence.
3-10