Hardware Setup
USB Keyboard Wake-up Jumpers: JKBUSB & J21
The JKBUSB/J21 jumpers are used to set USB keyboard wake-up
function. (Please note JKBUSB is for USB rear ports and J21 is for USB front
pin header: USB2) To use the function, you should also go to BIOS to enable
the USB keyboard wake-up (power on) function.
1
JKBUSB
1
J21
3
1
1
3
5V Standby
VCC 5V (Default)
Enable Keyboard Power On Function
Disable Keyboard Power On Function
Note: To be able to use this function, you need a power supply that
provides enough power for this feature. (Power supply with 750mA 5V
Stand-by)
2-23