Update Software; Update Software Via The Internet; Update Software Via Usb - Philips BDP2930 User Manual

Hide thumbs Also See for BDP2930:
Table of Contents

Advertisement

[Restore default settings]: Reset this
player to the default settings made at
the factory, except for password and
parental control level.
Note
You cannot restrict Internet access on commercial
Blu-ray discs.
Before you purchase DivX videos and play them on this
player, register this player on www.divx.com with the
DivX VOD code.

4 Update software

Before you update the software of this player,
check the current software version:
Press , and then select [Setup] >
[Advanced] > [Version information], and
press OK.
Update software via the
Internet
1
Connect the player to the Internet (see
"Set up a network").
2
Press , and select [Setup].
3
Select [Advanced] > [Software update]>
[Network].
» If an upgrade media is detected, you
are prompted to start the update.
4
Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.

Update software via USB

1
Check the latest software version on www.
philips.com/support.
Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a Unzip the download, and make sure
that the unzipped folder is named
"UPG_ALL".
b Put the "UPG_ALL" folder in the root
directory.
EN
Page 15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents