On-Screen Display Settings - Tiviar Alpha Plus User Manual

• Video Output
SCART output. RGB is much higher quality than CVBS.
• HDMI Dolby Digital: Determine whether or not to pass through Dolby
audio via HDMI when available.
• Dolby Digital
when available.
• Sound Mode: Generally, an audio track has two sound channels. Deter-
mine which sound channel to use by default.
• Power Saving in Standby
display shows nothing when in standby mode. With this disabled, it dis-
plays the current time.
• Audio Sync Delay: If the sound and picture don't match up, adjust this
until they match.

8.5 On-Screen Display Settings

Open the Settings
• Info Box Position: Specify how much to raise or lower the position of the
programme information dialogue box.
• Info Box Display
formation dialogue box when changing channels.
• Volume Bar Display
when adjusting the volume.
• Zapping Mode: Determine what to display when changing channels.
With this set to
to Freeze, the receiver displays the last still picture of the previous chan-
nel.
• Up/Down Key: Determine for what to use the up and down naviga-
tion buttons when watching a channel. With this set to
56
Mode: Determine which colour space to use for the
Default: Determine whether or not to use Dolby audio
Mode: With this enabled, the receiver's front
> Configuration
Time: Specify how long to display the programme in-
Time: Specify how long to display the volume bar
Black Screen, the receiver displays nothing. With this set
> Display Setting
8.5 O-S D S
menu.
Simple Service