Scanning For Every Channel; Scanning A Specific Transponder - Tiviar Alpha Plus User Manual

Scanning for Every Channel

Three methods are available for scanning for every channel.
• Set Search Mode
ous database of transponders when scanning for channels. Choose
Calibration and determine how long the receiver should wait to get time
information from each transponder.
• Set Search Mode
ceiver may happen to miss some channels when scanning for channels
using the transponder database. With this method, the receiver scans
all potential transponders using every possible combination of trans-
ponder elements not to miss any channel in a scan. However, it takes
much longer time.
• Set Search Mode
manage dedicated transponders to provide up-to-date transponder in-
formation. With this method, the receiver uses that sort of transponder
for faster and more precise scanning. Choose
a satellite TV service provider.
Make sure that the common options are properly configured before select-
ing Service Search

Scanning a Specific Transponder

Generally, one transponder carries multiple TV channels. To scan a specific
transponder for the channels it carries, set
need to get several details about a target transponder.
• Frequency: Choose a target transponder from the list of transponders.
• Symbol rate: Specify the transponder's symbol rate.
• Polarity: Specify the transponder's polarization.
S C
to Auto. With this method, the receiver uses its numer-
to Blind. Transponders occasionally change, so the re-
to Fast Scan. Particular satellite TV service providers
to start channel scan.
Select Operator
Search Mode to Manual. Users
Time
and select
21