Scanning Satellite Tv Channels - Tiviar Alpha Plus User Manual

3.4 Scanning Satellite TV Channels

Open the Settings
Three methods are available for scanning for satellite TV channels.
• Scanning all available transponders for every channel
• Scanning for multiple channels that a specific transponder carries.
• Scanning for a specific one of multiple channels that a specific trans-
ponder carries.
Some option items, including
two or more scanning methods, as follows:
• Satellite: Choose a target satellite from the list of satellites.
• Tuner: Determine which of the dish connectors to use.
• Search Type: Determine which types of channels to scan for.
• All Service: Scan for all available TV and radio channels.
• FTA Only: Scan only for free TV and radio channels.
• TV Only: Scan only for free and pay TV channels.
• Network Search: A transponder usually has information about other
transponders provided by the same satellite TV service provider. It is bet-
ter to turn on this option so that the receiver uses broadcast network in-
formation for faster and more precise scanning.
When any dish settings need to be reconfigured, select
sitioner Setting to jump to the relevant menu. To return to this menu, select
Service Search.
Particular LNBs have a indicator light to show if the signal strength is good
enough for the receiver to perform a channel scan. This may be useful when
installing a new satellite dish. To activate this function, press the green but-
ton and then confirm to use it.
20
> Installation > Satellite Search
Satellite
menu.
and Tuner, are used in common in
Dish Setting
3.4 S S TV C
or Po-