Nokia 6700 User Manual page 66

66 Connectivity
Open the paired devices tab.
Before pairing, decide on your own
passcode (1-16 digits), and agree with
the user of the other device to use the
same code. Devices that do not have a
user interface have a fixed passcode.
You need the passcode only when you
connect the devices for the first time.
After pairing, it is possible to authorise
the connection. Pairing and authorising
the connection makes connecting
quicker and easier, as you do not have
to accept the connection between
paired devices every time you establish
a connection.
The passcode for remote SIM access
must have 16 digits.
1 Select Options
device. The device starts to search
for Bluetooth devices within range.
If you have sent data using
Bluetooth connectivity before, a list
of the previous search results is
displayed. To search for more
Bluetooth devices, select
devices.
2 Select the device with which you
want to pair, and enter the
passcode. The same passcode must
New paired
>
More
be entered to the other device as
well.
3 Select Yes to make the connection
between your device and the other
device automatic, or
the connection manually every time
a connection attempt is made. After
pairing, the device is saved to the
paired devices page.
To give a nickname to the paired device,
select Options
>
The nickname is only displayed in your
device.
To delete a pairing, select the device
whose pairing you want to delete and
Options > Delete. To delete all
pairings, select Options
you are currently connected to a device
and cancel the pairing with that device,
pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect
automatically to your device, select
as authorised. Connections between
your device and the other device can be
made without your knowledge. No
separate acceptance or authorisation is
needed. Use this status for your own
© 2010 Nokia. All rights reserved.
No to confirm
Assign short name.
Delete
>
all. If
Set