Power Wheels Jeep Junior 74240 Owner's Manual And Assembly Instructions page 10

12
Hole
Left
Peg
11
1
• Position the vehicle body upright.
• Fit the peg on the left side of the seat into the hole in
the left side of the vehicle body
• Push firmly near the peg on the right side of the seat
to snap it into the hole in the right side of the vehicle
11
body .
2
11
11
.
1
Assembly
13
Microphone
Hole
Right
Microphone
Peg
2
Cord
• Fit the key assembly into the large hole below
the handlebar.
• Bend the end of the microphone cord so that the tip
forms a "T".
• Fit the end of the microphone cord into the small hole
below the handlebar. Pull up gently on the microphone
cord to make sure it is secure.
• Fit the tab on the back of the microphone into the notch
on the side of the vehicle body.
One-time assembly is now complete.
10
Key
Assembly
Notch