Osd Message; Factory Mode Introduction - Dell 2209WA Service Manual

Service Manual
Menu Transparency
Menu Timer
Menu Lock
Menu rotation
Audio Option
DDC/CI
LCD Conditioning
Factory Reset
In OSD dialog box, should show current input video signal (1 stands for Auto
Detect, 2 stands for VGA input, 3 stands for DVI input), current model resolution @
Ver. Freq., optimum resolution.

5. OSD Message

After disconnecting the cable, Self Test message should show as below:
Present input status (1. Auto Detect, 2 VGA input, 3 DVI input), and present
input source should be shown on the top of the message.
After disabling the sync output for VGA (DVI), DPMS message should show as
below for 3s:
Ú
Press the "
There is no sigal coming from you computer
Press any key on the keyboard or mouse to wake it or press the
Input button on your display to switch to another source
y Mode Introduction
Factor
With signal input, press "Power" button
monitor. Press "Menu" and "
to turn on the monitor. After power on, the device is enter factory modode ,press
Ù"(
" Plus )buttons to call out factory menu (see the following Fig)
Unlock
Lock
landscape
portrait
On
Off
Enable
Disable
Disable
Enable
"No VGA Cable"
"MESSAGE
Entering Power save Mode"
Ù`
" or " " key and the DPMS message should show as below:
"MESSAGE
on right corner of front bezel
Ù"(
Plus )buttons together, and then press "Power" button
38
20 Yes
20 Yes
Yes
Yes
Yes
Yes
Yes
Yes
to turn off the
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes