Disassembly; Installing The Freezer Drawer Handle; Installing And Removing Door; Dismantle And Install The Front Decoration - Haier AFL631 series Service Manual

SERVICE MANUAL
Model: AFL631 & CFE633
Chapter 3 Disassembly

3-1 Installing the Freezer Drawer Handle

(1) Take the handle from the packing bag and align it with the handle seat on the door.
note: the screw hole on the handle should be facing downward.
(2) Secure it with the screw from the bottom.

3-2 Installing and Removing Door

Precautions During Dismantling and Installation of The Door
(1) Before removing the doors, please remove food from the shelves and the bottle guards. Then,
unplug the refrigerator power cord to avoid personal injury, product damage or property loss.
(2) During dismantling of the door, in order to avoid possible personal injury, product damage or
property loss, at least two adults are needed to perform the following operations.
(3) While lifting the hinges to separate it from the door, please take care to prevent the door from falling
forward.
3-2-1 Dismantle and install front decoration strip of the table-board and the upper hinge
Before change
PART-1
Front decoration strip of the table-board
Screw
⑴ Pull decoration covers 1 and 2 downward to remove them and retain.
⑵ Detach the 2 screws fixing the front decoration strip of the table-board.
Upper hinge
Cover 2
Screw
Cover 1
Issue 200905
Rev. Ref0905S003V0
After change
12