Panasonic KX-FP701ME Service Manual page 73

Plain paper fax with copier
Table of Contents

Advertisement

• Please use genuine Panasonic replacement film.
(Refer to Optional Accessories (P.10).)
• The ink film is empty. Replace the ink film with a new one
(Refer to Installing the Ink Film (P.56)).
• The ink film is not installed. Install it (Refer to Installing the
Ink Film (P.56)).
• The ink film is slack. Tighten it (See step 5 on Installing the
Ink Film (P.56)).
• The fax machine is positioned near appliances such as TVs
or speakers which generate an intense magnetic field.
• A recording paper jam occurred. Remove the jammed paper.
(Refer to Recording Paper Jams (P.157).)
• You forced the recording paper into the paper tray too
strongly. Remove all of the installed paper, and re-install it
gently.
• There is no space to store new items in the phonebook.
Erase unnecessary items.
• The unit is checking that there is no slack or crease in the ink
film. Wait for a moment while the check is completed.
• The other party's fax machine is busy or has run out of
recording paper. Try again.
• The document is jammed. Remove the jammed document.
(Refer to Document Jams - sending (P.159).)
• Press [STOP] to eject the jammed paper.
• A transmission error occurred. Try again.
• If you are sending a fax overseas, try the following:
—Use the overseas transmission mode (feature #23 on Pro-
gram Mode Table (P.97)).
—Add 2 pauses at the end of the telephone number or dial
manually.
• The unit is too hot. Stop using the unit for a while and let the
unit cool down.
73
KX-FP701ME

Advertisement

Table of Contents
loading

Table of Contents