Panasonic SC-MAX770 Operating Instructions Manual page 13

One-Touch Connection
(Connecting by NFC)
For NFC-compatible Android devices only
TM
Simply by touching an NFC (Near Field Communication)-compatible
Bluetooth device by the unit, you can complete all preparations, from
®
registering a Bluetooth device to establishing a connection.
®
Preparation
• Turn on the NFC feature of the device.
• Android device version lower than 4.1 requires the
installation of the app "Panasonic MAX Juke" (Free of
charge).
1 Enter "Panasonic MAX Juke" in the search box of
to search, and then select
Google Play TM
"Panasonic MAX Juke".
2 Start the app "Panasonic MAX Juke" on the device.
-Follow on-screen instructions on your device.
-Always use the latest version of the app.
1
Press [ , MEMORY] (main unit:
[ /MEMORY,-PAIRING]) to select "BLUETOOTH".
2
Touch and hold your device on the NFC touch
area of this unit [ ].
Bluetooth ® device
• Once the registration and connection of the
Bluetooth device is complete, the name of the
®
connected device is indicated on the display. Move
the device away from the unit.
• When the connection is not established even if
your device has touched the NFC touch area,
change its touching position.
3
Start playback on the Bluetooth
Note:
• If you touch another device to this unit, you can update the
Bluetooth connection. The previously connected device
®
will be disconnected automatically.
• If the image and sound are out of sync during playback,
restart the playback app you are using. If the problem
persists, connect the Bluetooth
an audio cable (not supplied).
• When the connection is established, the playback may start
automatically depending on the type of device being used.
• The One-Touch Connection may not work properly
depending on the type of device being used.
Bluetooth
If you enable this function, even when the main unit is
turned off, it will turn on automatically when a Bluetooth
device sends a connection request.
1
Press [ , MEMORY] (main unit:
[ /MEMORY,-PAIRING]) to select "BLUETOOTH".
2
Press [PLAY MENU] to select "STANDBY MODE".
3
Press [2, 1] to select "ON STANDBY MODE" or
"OFF STANDBY MODE" and then press [OK].
Viewing available information
You can view the following information on the display panel:
• Name of the connected device (maximum 16 characters).
• Bluetooth ® profile used.
Press [DISPLAY-DIMMER].
device.
®
device and this unit with
®
standby mode
®
Link mode
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
If this system is connected to a Bluetooth
disconnect it ( "Disconnecting a device").
1
Press [PLAY MENU] to select "LINK MODE".
2
Press [2, 1] to select "MODE 1" or "MODE 2"
and then press [OK].
• MODE 1
Emphasis on connectivity.
®
• MODE 2
Emphasis on sound quality.
Note:
The default setting is "MODE 2".
Disconnecting a device
1
Press [PLAY MENU] repeatedly to select
"DISCONNECT?".
2
Press [2, 1] to select "OK? YES" and then
press [OK].
Note:
A device is disconnected when you:
• Select a different source.
• Move the device out of the maximum range.
• Disable the Bluetooth transmission of the device.
®
• Switch off the system or the device.
® device,
13