Electrical Wiring And Connections; Dc Connections - GME G-Deck Instruction Manual

multimEDia HuB mountinG Points
G - D E K i n s t r u c t i o n m a n u a l
ELECTRICAL WIRING AND
CONNECTIONS

DC ConneCtions

Caution:
the G-DEK is designed for vessels with a 12 volt
negative ground electrical system only!
referring to the connections diagram:
1. connect the Yellow wire directly to the positive terminal of
the vessel's battery, or to a point that has +12 volt available
at all times. this lead maintains the memories within the
G-DEK and is the main power source for the unit.
2. connect the red wire to the vessel's +12 volt supply via
an appropriate isolating switch or circuit breaker. this lead
enables the radio to be switched on and oFF. alternatively,
this wire can be connected directly to the battery's positive
terminal and the G-DEK switched on and oFF using its
own controls.
Pa G E 1 2