FCC Part 15 ComPlianCe FEATURES this equipment has been tested and found to comply with • reorient or relocate the receiving antenna. • aM/FM radio the limits for a Class B digital device, pursuant to part • DaB radio (GM550) •...
G-DEK to be used to broadcast voice ACCESSORIES SUPPLIED INTRODUCTION announcements on your vessel. the G-DEK Multimedia Entertainment System is supplied with Congratulations on purchasing the GME G-DEK series marine the G-DEK marine multimedia system has been developed...
CONTROLS r1 remote Head Mute Power on/off Selector Knob Search Forward audio Source Search Backwards Stereo/Mono auto Memory Store local/Distant Band Select Memory Buttons liquid Crystal Display Equaliser Settings loudness Selector options Display/Clock G - D E K i n S t r u C t i o n M a n u a l Pa G E 5...
SD cards, an iPod Connector if you are connecting your G-DEK for the first time or have iPhone or iPod (via the in-built apple interface), generic media just reconnected your boat battery and you are experiencing players (via a 3.5 mm interface cable), CD players, DVD players...
G-DEK rremote head is supplied with a cabin 1. Fit the two gimbal mounts to the rear of the remote head cover. When the G-DEK is not in use the cabin cover should be using the screws provided.
Page 9
FittinG tHe Gimbal mounts FittinG tHe mountinG braCKet G-deK remote Head Gimbal mount Gimbal mount Gimbal Knob mounting bracket Gimbal Knob mounting bolts G - D E K i n S t r u C t i o n M a n u a l...
FlusH mountinG FiG.2 FiG.1 Before starting, select a suitable panel for the mounting location then examine behind the panel to determine that there is sufficient access for routing the cable and fitting the Panel < 6 mm Panel 6 – 9 mm mounting screws.
Page 11
FlusH mount usinG sCrews FlusH mount usinG tHreaded rods 4 x 12 mm screws 4 x 25 mm Where the panel or bulkhead is made from thicker material such as wood or laminated fibreglass, install the remote head threaded rods using the 4 x 25 mm threaded rods, stainless steel washers and nuts provided.
FlusH mount usinG adHesive taPe mountinG tHe multimedia Hub Feed the cable through the centre hole in the panel then peel the multimedia hub can be mounted in almost any convenient the remaining backing from the adhesive tape and carefully remote Head location however it should be protected from sunlight and position the remote head against the panel, ensuring it is level.
ELECTRICAL WIRING AND CONNECTIONS dC ConneCtions Caution: the G-DEK is designed for vessels with a 12 volt negative ground electrical system only! referring to the connections diagram: 1. Connect the Yellow wire directly to the positive terminal of the vessel’s battery, or to a point that has +12 volt available at all times.
Page 14
ConneCtions G-deK multimedia Hub G - D E K i n S t r u C t i o n M a n u a l Pa G E 1 4...
(auto antenna) wire on the wiring loom supplies auXiliarY inPuts antenna ConneCtions 12 volts when the G-DEK is switched on and can be used to there are two auxiliary inputs to allow connection of audio/ turn on an external device whenever the G-DEK is switched on.
• aux 2: the auxiliary 2 input accepts low level audio from a ensure the G-DEK is ready to operate for the first time. if at plug-in microphone MC517BPa is available through your GME CD, DVD player, digital set top box or similar device. the left any time the controls do not seem to work (after replacing the dealer.
BaSS, MiD and trEBlE settings on the button will display ‘GooDBYE’ and will switch off. While the G-DEK is to cycle through the loudness settings press the button are only available when the Equaliser is set to manual (the icon switched off it will display the clock.
Press the button repeatedly to cycle through the G-DEK’s ‘MutE’ will flash on the display to confirm the G-DEK has been available input sources. the icon for the selected input source When first connected, the G-DEK will default to the European muted and the speakers will remain quiet.
Page 19
1 – 6. the press the buttons. the button will step upwards G-DEK will jump immediately to that station and the memory in frequency and the button will step downwards in automatic Programming of stations using ams number will appear on the lCD.
3. Press and hold the chosen memory button 1 – 6. the G-DEK station memories and band selector dab tuner (Gm550) will beep and the memory number will appear on the display.
2. rotate the knob to select ‘SonG’ then press to confirm your or movie on your device. the iPhone/iPod media can also be the G-DEK can be connected directly to an iPhone or iPod via selection. the title of the first song is displayed.
1. Press the selector knob. ‘SEarCH’ is displayed. the G-DEK can play multimedia files directly from an SD card or selection. a uSB memory stick. the following file formats are supported: 2.
Page 23
G-DEK will play MP3 and WMa files. While playing, the the card can only be inserted one way. Do not force it. to select the SD input manually, briefly press the button display will continuously cycle the track number and playing...
Page 24
Playback Pause the G-DEK allows you to search for specific files on the media track, repeat the current folder or repeat all the songs in your source. to access the Search function, briefly press the selector to pause the playback, briefly press the button.
Page 25
Wait. the display changes to TRK -- 1 the G-DEK will display photos/pictures from the uSB media or > Press again to cancel the repeat function. ‘rPt oFF’ is rotate the knob to select ‘2’.
3. to control the microphone gain to the speakers, adjust the control of all major G-DEK functions from a distance of up to the descriptions in the remote diagram have been colour selector knob while speaking into the microphone.
remote Control batterY rePlaCement General move leFt move uP usb/sd media Should the working range of the remote handset become am/Fm/dab tuner reduced, or functions fail to operate correctly, the battery Power on/oFF move riGHt POWER should be replaced: move down ENTER PlaY/Pause 1.
SEtuP Chinese, French, the System Setup allows access to the G-DEK’s full system a few seconds for the menu to time-out. German, Portuguese configuration menu. to access the System Setup menu press the setuP button on the remote control.
Size: 211 (W) x 50 (H) x 190 (D) mm Station Memories: From time to time GME may introduce new and additional products to Weight: approx 400 g the range or discontinue existing accessories. Details of any changes may...
2. 1 this warranty is in addition to and does not limit, or GME). our contact details are set out in clause 2.7. this exclude or restrict your rights under the Competition and (ii) the repair of the goods;...
Page 32
1300 463 463 or neglect; Email: servadmin@gme.net.au a division of Standard Communications Pty ltd. Head office: Po Box 96, Winston Hills, nSW 2153, australia. new Zealand (09) 274 0955 all other international enquiries email: export@gme.net.au Part number: 310604 Drawing number: 46959-2...
Page 33
ø DRILL HOLE 16.0 ø DRILL HOLE 3.5 x 4 73.3 146.5 Mounting template G-Dek Remote Head flush mount template DN: 46904-1 PN: 310596...
Need help?
Do you have a question about the G-DEK and is the answer not in the manual?
Questions and answers