Table of Contents
Advertisement
STEP 2 (Continued): number dialed; each P stands for a 2-second pause; the next four digits followed by the #
sign represent the pager code and the * stores the programming process for that number.
STEP 3: Press "0" to exit PROGRAM NUMBERS.
STEP 4: Press "1" at the PROGRAM: T-LINE prompt.
STEP 5: Press "1" for TONE dialing; then press "2" to indicate no PBX.
STEP 6: Press "1" at the PROGRAM: OGM prompt.
STEP 7: Using a prepared script and speaking six-to-eight inches from the dialer's microphone on the front of
the unit, press "R" when you are ready to enunciate your emergency message.
STEP 8: Press "1" to play back the recorded message. Press "1" again to accept.
STEP 9: Press "1" at the PROGRAM: INPUT prompt.
STEP 10: Press "2" to program input for CONTINUOUS activation.
STEP 11: Once a selection is entered for the activation of the input, the dialer will return to the PROGRAM:
NUMBERS prompt.
PRESS "M" TO EXIT PROGRAMMING MODE
P r o g r a m P l a n n e r
.
19
Advertisement
Table of Contents
