Table of Contents
Advertisement
IPORTANT: If you make a mistake while entering a phone number, simply press the
This will bring you back to the screen that says Select: 1 – 4 or 0 for Done. Select the same
memory slot you were working on, and re-enter the number.
STEP 3A: NUMERIC PAGERS
If you pressed "1" to program in a numeric pager...
st
Only if this is the 1
memory slot, enter in the five pauses by pressing the P button 5 times, otherwise...
Press the digits of the pager to be called. The numbers will appear on the LCD
Press "P" button to enter as many pauses as necessary to give the pager system enough time to answer the
phone call and get to the point where it can accept the numeric code you want to be delivered.
(Remember, each "P" provides a 2-second pause).
Press the digits of the numeric pager code.
Press "*" to store the sequence.
Example: To store numeric pager number 555-1212, a 4-second Pause and code 3456:
Press:
NOTE: SOME PAGER SERVICES REQUIRE A "#" SIGN FOR SEPARATION OF THE NUMERIC CODE
OR AT THE END OF THE NUMERIC CODE FOR PROPER TRANSMISSION.
STEP 3B: TELEPHONE NUMBERS
If you pressed "2" and wish to program in a telephone number...
st
Only if this is the 1
memory slot, enter in the five pauses by pressing the P button 5 times, otherwise...
Press the digits of the number to be dialed. For long-distance numbers, first press "1" followed by the area code
and then the number. For CELLPHONES enter 3 pauses (press P button 3 times) after the digits of the phone
number, but before pressing the asterisk to record. The number will appear on the LCD.
Press "*" to store the sequence.
Example: Store telephone number 1-800-555-1212:
Press:
REMEMBER/NOTE: Before programming your dialer to call the police, fire department 0r 9-1-1
directly, you must check with these agencies for their approval.
STEP 3C: VOICE PAGERS
If you pressed "2" and wish to program in a voice pager...
st
Only if this is the 1
memory slot, enter in the five pauses by pressing the P button 5 times, otherwise...
Press the digits of the pager to be called.
Press "P" one or more times in accordance with the number of seconds needed to accommodate the pager.
(Remember each "P" provides a 2-second pause).
Press "*" to store the sequence. The number will appear on the LCD.
Example: To store voice pager 555-1212 and a 4-second pause:
Press:
P r o g r a m m i n g T h e W A - 9 0 0
12
*
button.
Advertisement
Table of Contents
