USP Wanderer Alert WA-900 User Manual page 15

Personal emergency response system supervised 900mhz wireless
Table of Contents

Advertisement

Programming And Recording Your Outgoing Message
Follow these steps to program and record your outgoing message. Skip this portion if you have programmed in
only numeric pagers, which don't require a voice message. As with all WA-900 programming, the unit need not
be connected to a phone line when information is programmed in. Remember that "OGM" stands for outgoing
message (total OGM time is 20 seconds).
Typically the dialer is programmed to notify family, friends or another responsible party. Before programming
your dialer to call the police, fire department or 9-1-1 directly, you must check with these agencies for their
approval.
STEP 1: Before programming, write down all your message. Time the message carefully to fit in the alotted
time frame. Practice saying the message, clearly enunciating the message for maximum clarity in case of an
emergency. Keep a final recording script.
STEP 2: Program your OGM.
A) The LCD will read: PROGRAM: OGM
B) Press "1" to program your OGM. Press "2" if you have already recorded your voice message or if you are
only calling numeric pagers that don't require a voice message.
STEP 3: After selecting your option as explained in Step 2, record your message.
A) The LCD will read:
B) Referring to your script and speaking in a normal voice at about 6-12 inches away from the unit., press and
hold R (the word RECORDING will be displayed), releasing the key after you have completed enunciating
your messages. The word DONE will appear on the LCD when the maximum alotted time has been reached.
C) The LCD will read:
Press "1" to play back your recording and verify that it has recorded properly
D) The LCD will read:
Press "1" to accept the recorded OGM.
Press "2" if you wish to re-record the message, beginning with Step 3.
Changing The OGM
After your system is up and operating, you may change the recorded OGM. To do so, simply scroll to the
programming section on your display: PROGRAM: OGM
Select the option, then begin again from Step 3 above to record your new message.
1(YES) 2(NO)
PRESS R
PLAY OGM
1(YES) 2(NO)
ACCEPT
1(YES) 2(NO)
1(YES) 2(NO)
P r o g r a m m i n g T h e W A - 9 0 0
14

Advertisement

Table of Contents
loading

Related Products for USP Wanderer Alert WA-900

Table of Contents