Control Console - EGi Millennium 1201 User Manual

8 Push button for talking
Once the zone is selected and after pressing this button, first the clock symbol
pre-warning tone sounds in the selected zone or zones. The system is ready to broadcast a message when
the icon appears.
9 Push button for accessing the Messages menu
Once the zone is selected and after pressing this button, you will be able to adjust the volume of the messages,
using the button to raise it and the button
select if a pre-warning tone will be played or not.
10 Music menu push button
Once the zone is selected and after pressing this button you will be able to adjust the volume of the music,
using the button to raiser it and the button
1 or 2 FM. If zone 1 has been wired in stereo, the key
select channel 1
mono and stereo.
11 Back to main menu push button
When pressed, it takes us back to the main menu.
12 Push button for selection of zone 2
When it is pressed, the symbol < will appear to indicate that the zone 2 has been selected.
13 Push button for selection of zone 1
When it is pressed, the symbol < will appear to indicate that the zone 1 has been selected.
14
Location of gooseneck microphone
Location for the microphone with gooseneck, only in 1201.11 version.

Control console 1201

to lower it. By means of push button number
to lower it. By means of push button number
will allow us the selection between
will appear while the
11
we can
we can
12 13 14
10 9 8
29
1201