Control Console 3 - EGi Millennium 1201 User Manual

Control console 1202. Operation of the pre-recorded message player
5
Replay of a message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded
message player (1103) in the system but NOT
a module for sending messages over the
telephone (1104):
MESSAGE
MSG. 5
REPEAT
Provided that message number 5 is
already recorded:
+ + +
INTERVAL
+
+
programs message 5 to
be played 2 times, with an interval of 1
minute between 2 repeats.
If the general access password is active the system will require us to
1202
introduce it every time we try to operate this module (see point 2 of
"access restrictions").
6 Changing the volume level of a
message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded
message player (1103) in the system but NOT
a module for sending messages over the
telephone (1104):
MESSAGE MSG. 6
MORE VOLUME
+ or – modifies the volume level of the
message. If reduced to 0, the message will be
played in each target zone at the volume level
that is set for paging there.
7
Monitoring a message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded
message player (1103) in the system but NOT
a module for sending messages over the
telephone (1104):
MESSAGE
MSG. 7 MORE
MONITOR
plays the message number 7 (if
previously recorded) by the built-in speaker at the
control console 1202. If the paging line is busy
because another message is being broadcast or
a pre-recorded message is being played or saved
from another console 1202, instead of playing
the message the following message will appear:
41