Auxiliary Input 4; Wall Base For Connection Of Control Consoles And Music Sources 4 - EGi Millennium 1201 User Manual

46
1 Push button ON/OFF
One press turns on and the next press turns off the auxiliary input 1106.
2 On lamp
It lights when the module is activated by pressing the push button ON/OFF or, automatically, when a signal
coming from a previous module is passing through.
3 Volume regulator
To turn up or down
4
Pilot lamp for volume regulation
It lights only when the module is activated locally, but not when signals coming from other modules are
passing through the auxiliary input. It blinks when the volume level has reached its top.
5
Inlet for audio source
An external audio source (CD player, cassette deck, soundblaster, etc.) can be connected here for local use.
A wireless microphone receiver can also be connected here.
Wall base for connection of control
consoles and music sources 1501
This wall socket can be used to connect whether a control console or any external audio source to the audio
processors 1301 or 1302. The two inlets that are present in the wall socket can be used simultaneously.
1
Pilot lamp for RCA signal reception
It lights when the RCA connectors are receiving an audio signal from an external music source which is
over the minimum sensitivity threshold.
2 Inlet for console
Inlet type RJ45 for the connection of control consoles 1201 or 1202.
3 Inlet for external audio source
RCA inlet for the connection of external audio sources.
Auxiliary Input 1106
the volume level of the auxiliary input.
1
2
3
4
5
1
1501
2
3
1106
1501