Disassembly Procedures; Cabinet Front Disassembly - Mitsubishi Electric WD-52525 Service Manual

MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825
Reusable Wire Ties
Do not cut wire ties during disassembly, reusable
wire ties are used in these models. Lift the tab to re-
lease the wire tie. During reassembly, re-use wire ties to
ensure all wiring harnesses are properly bundled and
dressed.
CABINET DISASSEMBLY (FRONT VIEW)
WD-52525 / WD-62525 / WD-52725 / WD-62725
*Refer to the Parts List for Part Numbers
Front Cabinet Disassembly
1. Remove the SPEAKER-GRILLE by pulling forward.
2. Remove screws (a) to remove the COVER-FRONT.
3. Remove screws (b) on the rear of the upper back cover (4 across the top and 3 on each side).
4. Remove the 4 screws (c) holding the bottom of the Screen Assembly.
5. Unplug connector LN from the Control Panel.
6. Lift the Screen Assembly up slightly then pull towards the front to remove the assembly.
Lift Tab to Release
Page 7
Wire Tie