Mitsubishi Electric WD-52525 Service Manual page 14

MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825
Removing the Optical Engine
1) Remove the Cabinet Back (refer to disassembly instructions).
2) Disconnect all connectors from the Optical Engine, Lamp Cartridge Housing and the PCB-DMD.
3) From the rear of the TV, remove the 4 screws (c), to remove the COVER-DUCT and DMD Fan cover.
4) From the rear of the TV, remove the 4 brass colored screws (a), shown below, securing the bottom plate to
the Adjuster assembly.
5) Slide the Optical Engine/Lamp Cartridge Housing towards the rear to remove from the TV.
(a)
Optical Engine (Rear View / Airduct & DMD Fan Cover Removed)
Page 14