Electrical Chassis Replacement - Mitsubishi Electric WD-52525 Service Manual

MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825

ELECTRICAL CHASSIS REPLACEMENT

1) Remove the 4 black screws (a) securing the chassis shown in the two diagrams below.
2) Unplug the USB and 1394 connectors from the Card Reader.
NOTE: In the V26++ chassis the Card Reader 1394 connector plug into the Hard Drive Module.
3) Disconnect all cables to the front of the cabinet, the Optical Engine and the Lamp Ballast (see next page).
4) Carefully slide the chassis from the cabinet.
5) IMPORTANT: After Electrical Chassis replacement, perform the Data Copy Procedure (page 16).
Page 10