Assembly Drawing - Health Stream Treadmill Owner's Manual

ASSEMBLY DRAWING

ASSEMBLY DRAWING
STEP 1- Assembly the console masts and the console
Secure the bolts on console mast
STEP 2-
A).Secure the right console mast with 4 pcs of
M8X15mm,using Allen wrench.Do the same
on left console mast
(Do not tighten the bolts)
STEP 4- Tighten STEP2 and STEP3 bolts
STEP 5- Attach the protective cover
A). Assembly the protective cover to base
frame, secure with screw 4X10mm
using Allen wrench.
STEP 3- Put the console onto to the
A).Secure with 2 pcs of M8X15mm bolt on the
right console mast,using Allen wrench.Do
the same on left console mast
(Do not tighten the bolts)
STEP 6-
5
DANGEROUS !
Do not hold on this place while
assembling. The fingers would
be jammed
console masts
Put the safety key on
its position