Advertisement
2. Ensure that the headphones are fully charged
3. Ensure that the headphones are turned off (Very important)
4. P ress down the Pairing button for 8-9 seconds until the red and
blue light flash alternately which indicates that you are in Pairing
Mode. Once paired successfully, the Blue LED light will come on.
5. Activate your mobile phone's Bluetooth pairing function.
6. S et the mobile phone to search for Bluetooth devices within range
and select "BT-301" from the list of devices shown.
7. I f you are prompted for a Passcode enter "0000" and press "ok"
to pair the headphones with your mobile phone. (Note: If the
Bluetooth version of your phone is 2.1, there is no need to enter
the passcode when pairing.)
8. N ow you can use your Bluetooth headphones to listen to music,
and make and receive phone calls. Some mobile phones will
connect automatically to the Jarv Joggerz Bluetooth Headphones
when restarted.
Powering On the Headphones
Press and hold down the Power button for 3 seconds to turn the unit
on and off or until Blue light comes on
Wearing Your Headphones
Your headphones should be worn with the multi- function button on
your right ear.
Advertisement
