Audio Settings - Linksys LCAD03FLN User Manual

Linksys
Quality - Video quality can be set in the range from Level 1 to Level 6, with
Level 6 producing the best image quality.
Recording Stream - Select the stream you like to record when a scheduled
event occurs.
Video Overlay
Timestamp - To display the date and time on the screen during live view, check
the Position check box to enable the timestamp function and select the display
position from the drop-down menu.
Text - To make a note about the camera, check the Position box to Enable and
select the display position from the drop-down menu. Enter a description in
the text box.
NOTE:
The video overlay only applies to Stream 1.
RTSP Server
To utilize RTSP authentication, you must first set a password for the camera.
RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media.
By default the port number is 554.
Authentication - Depending on the network security requirements, the camera
provides two types of authentication for streaming via RTSP: NONE and DIGEST.
If DIGEST authentication is selected, user credentials are encrypted using MD5
algorithm, thus providing better protection against unauthorized access.
RTCP Mode
Without SR - RTCP without SR (Sender Report) is the default option. Audio
and video received from the network camera are played immediately and
independent of each other.
RTCP with SR - RTCP with SR allows synchronization between video and
audio during live viewing. Choose this option if audio and video become
unsynchronized.

Audio Settings

The administrator can set up two separate streams for different viewing
devices. The administrator can enable or disable the audio function on either
stream. If audio is enabled, select the Audio codec from the drop-down menu.
Advanced Settings
Camera Speaker - If the speaker is enabled, select the volume from the drop-
down menu.
Echo Cancellation Enabled - Enable to avoid an echo.
Configuration
6