Network Settings; Discovery - Linksys LCAD03FLN User Manual

Linksys

Network Settings

There are several ways to setup the camera over the Internet: (1) obtain an
available dynamic IP address assigned by a DHCP server, (2) use a static IP, or
use PPPoE (Point-to-point over Ethernet). Select the desired setup mode from
the IP settings drop-down menu.
DHCP - The camera will automatically obtain an available dynamic IP
1.
address from the DHCP server each time it connects to the LAN.
Static IP - Select this option to manually assign a static IP address to
2.
the camera. Enter the static IP address, Subnet Mask, Default Gateway,
Primary and Secondary DNS provided by the ISP.
PPPoE (Point-to-point over Ethernet) - Use this mode if connecting to
3.
the Internet through a DSL Line. To utilize this feature, it requires an
account provided by an Internet Service Provider. Enter the user name
and password provided by the ISP.

Discovery

UPnP Discovery - Universal Plug and Play (UPnP) simplifies the process of
adding a camera to a local area network. Once connected to a LAN, the camera
will automatically appear on the intranet.
Bonjour Discovery - Click the check box if you would like the camera to be
discovered by Bonjour.
Configuration
9