Summary of Contents for Linksys LCAD03FLN
- Page 1 User Guide Linksys SMB-Series Cameras LCAD03FLN LCAD03VLNOD LCAB03VLNOD LCAM0336OD...
-
Page 2: Table Of Contents
Model No . : LCAD03FLN . . . . . . . . . . . . . . . . . . -
Page 3: How To Access Web Configuration
Linksys How to Access Web Configuration How to Access Web Configuration To access the camera’s live view, open a Web browser and enter the IP address of the camera. The login window will pop up requesting a user name and password. -
Page 4: Live Viewing
Linksys Live Viewing Live Viewing UDP - This protocol allows for more real-time audio and video streams. However, network packets may be lost due to network burst traffic and images may be broken. The UDP connection time-sensitive responses are more important than video quality. - Page 5 Linksys Live Viewing Talk - transmit audio through the camera using the computer microphone. Brightness - Drag the slider bar to adjust the image brightness level. Mic Volume - Drag the slider bar to adjust the volume of the camera microphone.
-
Page 6: Configuration
Linksys Configuration Configuration Manual - Control exposure yourself. Advanced AE Setting Flicker-Free - Eliminates flicker. Environment - Select outdoor or indoor mode. Click the Configuration tab on the main page to change the camera settings. AE Speed - Automatically control exposure speed. -
Page 7: Video Settings
Linksys Configuration Video Settings Always - Use a single profile selected from the drop-down menu. Day & Night - Schedule separate profiles for day and night. Select profiles from The network camera offers two separate streams for different viewing options. -
Page 8: Audio Settings
Linksys Configuration Quality - Video quality can be set in the range from Level 1 to Level 6, with If DIGEST authentication is selected, user credentials are encrypted using MD5 Level 6 producing the best image quality. algorithm, thus providing better protection against unauthorized access. -
Page 9: Privacy Mask Control
Linksys Configuration Privacy Mask Control How to create a preset position Use the Pan, Tilt and Zoom (PTZ) controls to steer the camera view to Privacy Mask - Remotely disables live view and recording. Configure the the required position. privacy windows for up to three individual windows or for the full screen. -
Page 10: Patrol Setting
Linksys Configuration Patrol Setting Pan-Tilt Scanner NOTE: NOTE: (Only available with models with a RS485 interface) – Patrol Setting only (Only available with models with a RS485 interface) – Pan-Tilt Scanner works if a pan-tilt scanner is connected to the camera’s RS485 interface. -
Page 11: Network Settings
Linksys Configuration Network Settings Discovery There are several ways to setup the camera over the Internet: (1) obtain an available dynamic IP address assigned by a DHCP server, (2) use a static IP, or use PPPoE (Point-to-point over Ethernet). Select the desired setup mode from the IP settings drop-down menu. -
Page 12: Ddns
Linksys Configuration DDNS (DYNAMIC DOMAIN NAME SERVICE) HTTP/HTTPS DDNS links a domain name to an IP address, allowing users to easily access their camera even with a changing Internet IP address. Before utilizing this function, please apply an account from one of these DDNS providers - Dyndns or TZO. -
Page 13: Multicast
Linksys Configuration Multicast Multicast sends a video stream to the multicast group address and allows Differentiated Services Code Point (DSCP) is a field in an IP packet that enables multiple clients to acquire the stream at the same time by requesting a copy different levels of service to be assigned to network traffic. -
Page 14: Motion Detection
Linksys Configuration Digital Input How to create an event Click Add. This feature allows the camera to receive input from an external device through Click Enable. DI/DO socket. Enter an event name. NOTE: This feature is only available with models with a DI/DO interface. -
Page 15: Ftp Settings
Linksys Configuration FTP Settings Email Settings File Transfer Protocol (FTP) is used as an application component to automatically transfer files for program internal functions. How to configure email settings How to configure FTP settings Select Primary Email Server from the Server Selection drop down menu to send media files to an email server when an event is triggered. -
Page 16: Samba Settings
Linksys Configuration Samba Settings HTTP Settings Select this option to send media files via a network neighborhood when an This section allows you to configure your HTTP notification when an event is event is triggered. triggered. URL - Specify the URL to send a HTTP notification. The URL is normally written as http://IP_address/ notification.cgi?parameter. -
Page 17: Digital Output (Do)
Linksys Configuration Digital Output (DO) Play - Play the audio clip. Stop - Stop playing the audio clip. The DO socket allows the network camera to send output to an external device. Delete - Delete an audio clip. NOTE: Export - Export the audio clip to a local hard drive or network disk. -
Page 18: Video Clip
Linksys Configuration Video Clip Storage Management This function is used to determine when video clips will be recorded and stored Storage Management is used to view all the recorded files on the Micro-SD/ after an event is triggered. SDHC card. -
Page 19: User Management
Linksys Configuration User Management Access Control This section explains how to enable password protection and create multiple You can restrict camera access based on IP address. accounts. How to configure the IP Filter To enable Access Control, click check box of Enable IP Filter. -
Page 20: Back Up And Restore
Linksys Configuration Reset to Default The following message will show during the firmware upgrading process. Restore the camera to default factory settings. Back Up and Restore Click the check box if you don’t want Data and Time settings or IP settings to be restored to default. -
Page 21: System
Linksys Configuration System Date and Time This page displays the system’s log in chronological order. The system log is stored in the camera’s buffer area and will be overwritten when the buffer area is full. Mode - Manually enter the date and time or synchronize with NTP server automatically. -
Page 22: Save File Folder
Linksys Configuration Save File Folder Device Information You can specify a location where you like video recording and snapshot of the This section displays camera current status and configuration information. live viewing to be stored. NOTE: This feature can only work with Internet Explorer browser. -
Page 23: Vms Compatibility
Linksys Configuration System Information - Displays basic system information such as MAC address, Firmware version and Device Name. Network Settings IPv4/IPv6 - Displays current network status. Network Services - Displays network services information. Video/Audio Settings - Displays camera video and audio configuration settings. -
Page 24: Specifications
Specifications Specifications Audio Output: Y Compliance Information FCC/IC Class A and CE Class A Interface Model No.: LCAD03FLN 100Base-T Ethernet, DI/DO and SD/SDHC Card Slot Image Power Supply Sensor: 5 Megapixel CMOS Power over Ethernet: IEEE 802 .3af Maximum Image Resolution: 2048 x 1536, 3MP Maximum Power Consumption: <... -
Page 25: Model No.: Lcad03Vlnod
Linksys Specifications Model No.: LCAD03VLNOD Interface 100Base-T Ethernet, DI/DO and SD/SDHC Card Slot Image Power Supply Sensor: 5 Megapixel CMOS Power over Ethernet: IEEE 802 .3af Maximum Image Resolution: 2048 x 1536, 3MP Maximum Power Consumption: < 6W Video Environment Maximum Frame Rate: 18 fps@2048x1536, 30 fps@1920x1080, 30 fps@1280x720 Operating Temperature: -40°C ~ 50°C... -
Page 26: Model No.: Lcab03Vlnod
Linksys Specifications Model No.: LCAB03VLNOD Interface 100Base-T Ethernet, DI/DO, SD/SDHC Card Slot, Analog Video Output and RS- Image 485 for Scanners Pan-tilts . Sensor: 5 Megapixel CMOS Power Supply Maximum Image Resolution: 2048 x 1536, 3MP Power over Ethernet: IEEE 802 .3af Video Maximum Power Consumption: <... -
Page 27: Model No . : Lcab03Vlnod
Maximum Frame Rate: 20 fps@2048x1536, 30 fps@1920x1080, 30 fps@1280x720 NOTES Image Compression: H .264/MJPEG/MPEG4 Bitrate Control: Variable Bitrate and Constant Bitrate • For regulatory, warranty, and safety information, see the enclosed CD or go to Linksys .com/business Lens • Documentation is subject to change without notice. Fixed/Vari-focal: ImmerVision 360° Panomorph Lens Focal Length: f = 0 .98 ~ 1 .02 mm Focal Ratio: F2 .0... -
Page 28: Technical Support
© 2014 Belkin International, Inc. and/or its affiliates. All rights reserved. BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.