Table of Contents
Advertisement
Linksys
User Management
This section explains how to enable password protection and create multiple
accounts.
Enter the new user's name, password and confirm password. Administrators
can add up to 10 user accounts. Select the privilege level for the new user
account from the drop-down list.
Click Delete
or Update
Privilege levels can be assigned as:
Administrator - User has access to view and change the Configuration
•
page. Users with administrator privilege can change other user's access
rights and delete user accounts.
•
Viewer - User can only access the main page for live viewing.
•
Remote Viewer - User can only access the main page for live viewing
using TCP protocol.
to delete or modify a user's account.
Access Control
You can restrict camera access based on IP address.
How to configure the IP Filter
1.
To enable Access Control, click check box of Enable IP Filter.
2.
Select Allow Access or Deny Access options.
3.
Enter IP address range and click Add to List.
4.
Click Apply.
Firmware Upgrade
Upgrading the camera firmware takes a few minutes to complete.
Click Browse... to find the firmware file. Click Upgrade. The camera will begin
upgrading and will reboot automatically when the upgrade is finished.
NOTE:
Do not power off the camera or disconnect the Ethernet cable during
the upgrade.
Configuration
17
Hide quick links:
Advertisement
Table of Contents
