Restorer - Denon AVR-X510BT Owner's Manual

Contents Connections
o Subwoofer
Turn subwoofer output on and off.
On
(Default):
Off:
This can be set when the surround mode is set to "Direct" or "Stereo".
o Set Defaults
The "Surr.Parameter" settings are returned to the default settings.
Front panel Display
Playback
The subwoofer is used.
The subwoofer is not used.
Rear panel
Settings

Restorer

Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The "Restorer"
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
On: Use "Restorer".
Off
Do no use "Restorer".
(Default):
0 This item can be set with analog signals or PCM signal (Sample Rate = 44.1/48
kHz) is input.
0 This cannot be set when the sound mode is set to "Direct".
0 "Restorer" settings are stored for each input source.
0 The "Restorer" settings can be set even if RESTORER is pressed on the remote
control unit.
73 Remote
Tips Appendix
Index