BenQ U101 Series User Manual page 43

7. Gently push the free edge downwards until the module locks
into place.
If the memory module is not installed properly, your Joybook
Lite may not boot properly.
8. Replace the memory cover.
9. Use a screwdriver to secure the cover with the screws.
SSD
10.Place the battery on its original position (1), and then slide
"Battery retainer A" to the lock
power adapter. When you start the Joybook Lite, it will
automatically test and configure the new memory.
Battery retainer A
It is recommended that you go into BIOS to load setup defaults
after installing additional memory. For details, refer to
BIOS setup" on page 33.
position (2). Connect the
"Using
Installing additional memory 39