Bosch CM12 Operating/Safety Instructions Manual page 9

BM 2610021316 10-11 E:BM 2610021316 10-11 E.qxp 10/17/11 11:02 AM Page 9
25. Dust Elbow – Connects the dust chute to the
dust bag. Can be rotated to direct dust.
26. Dust Bag – Captures chips and dust. Has zipper
at the bottom. Bag can be uncoupled from elbow or
chute for emptying.
27. lower Guard Actuation link –Allows for
smooth movement of the lower guard.
28. Material Clamp – Used to hold the workpiece
to the table and base; insert into clamp post location
(item 29).
29. Clamp post location – Insert material clamp
post into hole prior to locking.
30. Brush Caps – Keeps motor brushes in position
and provides easy access for inspecting and replac-
ing brushes.
35
23
31. Bevel lock lever – Locks and unlocks the
head assembly at a desired bevel angle.
32. Bevel Scale and pointers – Allows user to eas-
ily read bevel angles. Pointer indicates current
angle.
33. left Bevel Stops – Adjust for 47°, 45°, and
33.9° bevel stops (crown molding setting).
34. -2° Right Bevel Stop – Slide front or back for 0°
or -2° bevel stop to right.
35. Arbor lock – Press arbor lock button to keep
blade from rotating when loosening or tightening
arbor bolt during blade removal or installation.
36. Head Assembly lock pin – Used to lock the
head assembly in lower position for transporting.
-9-
3
5
4
30
31
32
34
FIG. 2