BYD F3/F3R Owner's Manual page 207

5．Ensure that insert the full dipstick into
transmission dipstick canal.
6． Pull out dipstick and check oil level.
7． If the oil level is less than HOT min. pour oil
from filler door to make it between hot
upper-lower limit.
Notice ： The warming up state is the
standard judging the transmission oil level.
The cooling state the oil level should be
between the COLD upper-lower limit. that is
only to refer.
Slowly and carefully adding the transmission
oil, and don't make it overfilling. And you
should immediately clean the oil that is
overfilling. Because it can hurt the parts in
engine chamber.
You should use the BYD original ATF
（MITSUBISHI ATF SPⅢ）。
F3/F3R OWNER'S MANUAL
If the ATF has the smell of burn, that means
transmission oil has been polluted by the
burned particle and friction material, and the
transmission need overhaul.
8．Ensure that insert the full dipstick into
transmission dipstick canal.
Replacing the ATF is according to the stated
driving time and mileage in the regular
maintenance table. Discharging the full ATF
from transmission and then pour the new
ATF.
If you don't know how to pour the ATF,
contact the BYD AUTO authorized repair
store.
- 203 -