BYD F3/F3R Owner's Manual page 87

Ignition switch with steering lock
"START" — to start the engine
The key returns to the "ON" position when
released.
For starting methods, see Section 3.
When the ignition switch is turned to the
"START" position, the tachometer, fuel gauge,
and engine coolant temperature gauge
needles will return to bottom. This does not
indicate
malfunctions.
"ON" — to switch on the engine and all
accessories
This is the normal driving position. When the
ignition switch is turned to "ON", the
speedometer needle may have a move, this
does not indicates malfunctions.
"ACC" — to enable accessories such as the
radio to work while stop the engine
If you leave the key in the "ACC" or "LOCK", a
buzzer will remind you to remove the key
when opening the driver's door.
"LOCK" — to switch off the engine and lock
F3/F3R OWNER'S MANUAL
the steering wheel
The key can be removed only at this position.
You must press in the key to turn it from
"ACC" to the "LOCK" position.
When starting the engine, the key may seem
stuck at the "LOCK" position. To free it, first
make sure that the key is pressed all the way
in, and then rock the steering wheel slightly
while turning the key gently.
NOTICE
Do not leave the key in the "ON"
position if the engine is not running.
The battery will discharge and the
ignition device could be damaged.
- 83 -